Epson SD-10 User Manual page 33

SD-10 User's Guide
J
When you have finished measuring one row, the comparison results for each color in that row are displayed.
If any of the color measurement values for the colors in the rows compared exceeds the Passing Value,
displayed.
Press the enter button to move the comparison source data to the next row.
K
Move the device to the start of the next row and repeat from step 6 to measure all of the rows.
L
When color measurement for the final row is complete, press the enter button to check the results.
If the average color difference for corresponding colors between the groups is greater than the Passing Value,
is displayed next to the average color difference at the top of the screen. If the color difference is less than the
Passing Value, it is not displayed.
M
Close the sensor cover and turn off the device.
Comparison (Scan) Mode
33
is