Spring Adjustment (Walker Evans) - Polaris RZR PRO XP 2020 Service Manual

STEERING / SUSPENSION

SPRING ADJUSTMENT (WALKER EVANS)

The front and rear shocks have a ride height adjustment.
Suspension springs may be adjusted to suit different
riding conditions or vehicle payloads.
Uneven adjustment may cause poor handling of the
vehicle, which could result in serious injury or death.
Always adjust both the left and right spring equally.
The factory setting is appropriate for nearly all riding
conditions. If desired, the spring setting may be adjusted
to maintain vehicle clearance height when carrying
loads.
1. Raise and safely support front or rear of the vehicle
off the ground to allow the suspension to fully extend.
2. Using the shock spanner/spreader tool included in
the vehicle's tool kit, turn the adjustment collar
w
increase or decrease
Shock Spanner / Clutch Spreader Tool:
2878925
NOTICE
NOTICE
Polaris does not recommend increasing the spring
adjustment beyond the guidelines in the preload
adjustment chart as it may negatively impact vehicle
stability.
9.58
WARNING
e
ride height.
q
to
9850068 R01 - 2020-2021 RZR PRO XP / XP 4 Service Manual
© Copyright Polaris Industries Inc.