Dell EMC SD-WAN Edge 3000 Series Activation Manual page 2

Introduction
The Dell EMC SD-WAN Edge is purpose-built for next-generation WAN access deployments. The Dell EMC SD-WAN Edge
3000 series is a performance-designed solution integrated with industry-leading VMware SD-WAN software; and also offers
centralized orchestration and available gateways. It offers hosted virtualized network functionality, with applicability for the SP
Edge and Enterprise Branch. The SD-WAN Edge 3000 series is 1 RU sized, and uses the latest Intel
processor, which is optimized for high-performance networking. Dell EMC is the first to market with Xeon-D for SD-WAN.
● VMware SD-WAN Edge—a hardware device with VMware software preinstalled.
● VMware SD-WAN Gateway—VMware SD-WAN networks consists of gateways deployed at top tier network points-of-
presence and cloud data centers around the world. SD-WAN Gateway also provides SD-WAN services to the doorstep of
SaaS, IaaS, cloud network services, and access to private backbones.
● VMware SD-WAN Orchestrator—SD-WAN Orchestrator provides centralized enterprise-wide configuration, real-time
monitoring, and orchestrates the data flow into and through the SD-WAN overlay network.
NOTE: For software information, see the VMware documentation at https://sdwan.vmware.com/.
NOTE: After unpacking the Dell EMC SD-WAN Edge 3800 system, inspect the device and immediately report any damage
to your Dell Technologies sales representative.
Dell EMC SD-WAN Edge 3800 installation considerations
It is important to work with your company IT or security teams to determine the network infrastructure for the site where the
SD-WAN Edge 3800 system is to be installed. If the SD-WAN Edge 3800 system is to be connected behind a firewall, these
settings must be in place for the product to function properly.
Table 1. Mandatory ports
Protocol
VeloCloud Multipath Protocol (VCMP)
HTTPS
NTP
DNS
If the SD-WAN Edge 3800 system is connected behind a NAT, UDP hole punching is used to open the ports for inbound VCMP
traffic. To enable UDP hole punching, click Configure > Edge > Device > WAN Settings to edit the relevant overlay.
Table 2. Conditional ports
Protocol Port
IKE UDP/500
ESP IP/50
NAT traversal UDP/4500
NOTE: If you plan to use SFP/SFP+ modules, contact your Dell Technologies Sales Representative to ensure compatibility.
Dell EMC SD-WAN Edge 3800 standard configuration
Follow the steps below to install the SD-WAN Edge 3800 system in the standard configuration.
2
Port
UDP/2426
TCP/443
UDP/123
UDP/53
Description
Used by SD-WAN Edge 3800 system to form IPSec tunnels with certain CSS solutions
Used by SD-WAN Edge 3800 system to form IPSec tunnels with certain CSS solutions
Needed to pass IKE and ESP over NAT
Description
VMware SD-WAN tunnel protocol
Needed for SD-WAN Orchestrator communication
Needed for time sync (security)
Needed for translation of SD-WAN Orchestrator URLs,
among other use cases
® ®
Xeon D-2100 x86-based