Installation; Installation Overview - Siemens A53685 Installation & Operation Manual

Airlink mars software defined radio (sdr)
Table of Contents

Advertisement

_________________________________________________________________________________________________________
3

INSTALLATION

3.1

Installation Overview

Pre-installation planning is key to a good installation. This includes careful consideration of
mounting location in relation to input power, antenna(s), and backhaul connectivity (for base
stations). Before installation, ensuring the site is well-grounded and prepped for lightning
mitigation, power surges, etc. is imperative. Refer to Motorola R56
for Communication Sites" for recommended best practices for site preparation. Additionally,
environmental conditions, the mounting method, required tools, and equipment should also be
considered.
This information is intended to serve as an overview for installing the Airlink Mars radio and
its associated equipment. Instructions for each task are provided in the following sections.
Plan the installation, paying particular attention to environmental
conditions at the site, ventilation requirements, surge protection,
grounding, and lightning protection.
Unpack and inspect the equipment
Physically install the equipment at the site
Connect the radio to the following equipment:
Antenna(s)
Backhaul
System equipment
DC power
Verify proper installation of equipment following installation
Optimize equipment and site using optimization checklist
2
Motorola Standards and Guidelines for Communication Sites, Motorola Solutions, Inc.
COM-00-21-05
Version No.: A
SECTION 3
INSTALLATION
Completely read the entire Installation section before beginning the actual
installation
For first time installers, it is recommended to set up a base station and
remote station in a lab environment connected to dummy loads to
understand setup and configuration prior to installing radios in a remote
environment.
2
"Standards and Guidelines
NOTE
NOTE
3-1
INSTALLATION
OCTOBER 2021

Advertisement

Table of Contents
loading

Table of Contents