Table of Contents
Advertisement
_________________________________________________________________________________________________________
7
SOFTWARE UPDATES
Software updates to the radio are made using the following methods:
●
Apollo is recommended to upgrade the software and should be used whenever
possible.
●
Complete reflash of the radio – this is a 25 – 30 Mbyte file and should be done
locally at the radio. There are two partitions in the radio, a primary and a backup
partition. Each partition needs to be separately reflashed depending on the
customer's requirements. After reflashing a partition, the configuration files will
need to be updated.
○
To reflash a partition, use the following procedure:
►
Copy the new flash configuration file (example: MS-FM_3.2.8-Mars-
MS.jffs2) to the /tmp directory in the radio (Must be copied to the /tmp
directory -note that /tmp directory is erased on a reboot)
▫ Note that there are different versions for the base station and the
▫ Each customer will have software tailored to their requirements and
▫ Software version number will follow the customer ID field
►
run the flashoff script: flashoff/tmp/ MS-FM_3.2.8-Mars-MS.jffs2
(overwrites the non-active partition and takes about 2 minutes)
Here is an example of the reflash:
root@BS5000:/root# flashoff /tmp/MS-FM_3.2.8-Mars-MS.jffs2 Erasing offline
partition 2...
Erasing 256 Kibyte @ 3200000 -- 100 % complete. Cleanmarker written at
31c0000.
Flashing /tmp/MS-FM_3.2.8-Mars-MS.jffs2 to offline partition 2...
Erasing blocks: 116/116 (100%)
Writing data: 29540k/29540k (100%)
Verifying data: 29540k/29540k (100%)
root@BS5000:/root#
►
run the reboot and change partition script: newboot -r -Y (reboots the
radio to the reflashed partition)
COM-00-21-05
Version No.: A
SECTION 7
SOFTWARE UPDATES
remote station. The base station begins with BS-FM and the remote
station begins with MS-FM
as such the software will have a customer ID embedded in the name
7-1
SOFTWARE UPDATES
OCTOBER 2021
Advertisement
Table of Contents
