Table of Contents
Advertisement
INSTALLATION
_________________________________________________________________________________________________________
3.8
Post Installation Checklist
The radios should come from the factory with configurations predetermined upon ordering. This
section applies to powering the radios on with proper configuration files. If changes need to be
made to radio configurations, refer to Section 5 for configuration information.
3.8.1 Applying Power
Before applying power to the station, make sure all cables are securely connected. Turn on the
DC circuit breaker or fuse that is supplying power to the radio.
3.8.2 Verifying Proper Operation
When the station is starting up, initially there will be this message on the screen:
While this screen appears, the radio is going through its startup menu and launching the
configuration file. After approximately 30 seconds, the following screens appear:
After 60 to 70 additional seconds, the radios will connect and begin scrolling through the
following screens:
If the base station does not start properly, the original screen will stay up, and no other screens
will scroll on the LED screen:
3-10
COM-00-21-05
OCTOBER 2021
Version No.: A
Advertisement
Table of Contents
