Table of Contents
Advertisement
INSTALLATION
_________________________________________________________________________________________________________
3.7
Post Installation Checklist
The radios may come from the factory with configurations predetermined upon ordering. This
section applies to powering up the radios with proper configuration files installed. If changes
need to be made to radio configurations, refer to Section 5 for further information.
3.7.1 Applying Power
Before applying power to the station, make sure all cables are securely connected. Turn ON the
DC circuit breaker or install the fuse that is supplying power to the Airlink Venus radio.
3.7.2 Verifying Proper Operation
When the station is starting up, initially there will be this message on the screen:
While this screen appears, the radio is going through its startup menu and launching the
configuration file. After approximately 30 seconds, the following screens appear:
After 60 to 70 additional seconds, the radios will connect and begin scrolling through the
following screens:
3-13
COM-00-21-04
OCTOBER 2021
Version No.: A.1
Advertisement
Table of Contents
