Human Exposure Statement - Siemens AIRLINK VENUS Installation & Operation Manual

HUMAN EXPOSURE STATEMENT

This equipment is designed to generate and radiate radio frequency (RF) energy using an
external antenna.
When terminated into a non-radiating RF load, the radio is certified to comply with FCC
regulations pertaining to human exposure to RF radiation in accordance with the FCC
Rules Part 1 section 1.1310 as published in title 47 code of federal regulations and
procedures established in TIA/EIA TSB92, Report On EME Evaluation for RF
Cabinet Emissions Under FCC MPE Guidelines. Compliance with FCC regulations of the
final installation should be assessed and take into account site-specific characteristics such
as type and location of antennas, as well as site accessibility of occupational personnel
(controlled environment) and the general public (uncontrolled environment). This equipment
should only be installed and maintained by trained technicians. Whether a given installation
meets FCC limits for human exposure to radio frequency radiation may depend not only on
this equipment but also on whether the environments being assessed are being affected by
radio frequency fields from other equipment, which may add to the level of exposure.
Accordingly, the overall exposure may be affected by radio frequency generating facilities
that exist at the time the licensee's equipment is being installed or even by equipment
installed later. The effects of any such facilities must be considered in site selection and in
determining whether a particular installation meets the FCC requirements.
FCC OET Bulletin 65 provides materials to assist in making determinations if a given facility
is compliant with the human exposure to RF radiation limits. Determining the compliance of
transmitter sites of various complexities may be accomplished through computational
methods. For more complex sites, direct measurement of the power density may be more
expedient. Personnel responsible for installing this equipment are urged to consult the listed
reference material to assist in determining whether a given installation complies with the
applicable limits.
COM-00-21-04
Version No.: A.1
iv
OCTOBER 2021