Table of Contents
Advertisement
_________________________________________________________________________________________________________
3.4
Electrical Connection
3.4.1 DC Power Supply Connection
The Airlink Venus radio is supplied with a mating screw terminal plug, Phoenix P/N: 1777989,
this plug will accept up to 12 AWG wires from an 18 to 60 VDC power supply. The DC source
must be capable of supplying 2 amps and is recommended to be on a dedicated circuit that is
protected by a fuse or circuit breaker capable of 5 amps. Ensure wire of appropriate size is
used. Tighten screw terminal locking screws with a screwdriver to prevent disconnection of the
plug from the socket.
Figure 3-3 DC Power Supply Connector Installation
COM-00-21-04
Version No.: A.1
ENSURE CORRECT POLARITY WHEN WIRING THE DC POWER
SUPPLY TO THE SCREW TERMINAL PLUG. THE POWER
SUPPLY (NOT PROVIDED) MUST MEET THE ELECTRICAL
REQUIREMENTS
AND
REQUIREMENTS FOR USE APPLICATIONS. INSTALLATION
SHOULD BE PERFORMED BY QUALIFIED PERSONNEL ONLY.
WARNING
STATE
AND
3-5
INSTALLATION
LOCAL
CODE
OCTOBER 2021
Advertisement
Table of Contents
