Table of Contents
Advertisement
CONFIGURATION
_________________________________________________________________________________________________________
○
IP CONFIGURATION (IP address, Netmask, Gateway, etc.)
○
UL/DL Frequency
○
BSIRP
○
RX_Gain
○
Sub-channel bitmap
●
snmpd.conf – snmpd configuration information
●
MSProfiles – Remote profile information
●
Serviceprofiles – Service profile information
5.2.11 Remote Radio Station
The operation of a remote station is determined by a set of configuration parameters organized
into the following files in the application partition.
The radio will ship from the factory with preset configuration files.
The operation of a base station is determined by a set of configuration parameters organized
into the following files in the application partition.
This section describes the key configuration elements for the Cobalt remote station on a per file
basis. Be aware the configuration files contain many other parameters which should not be
modified.
Detailed configuration information for Cobalt can be found in "BS5000 and Cobalt-Plus CLI
Operations and Configuration Manual" for your software version.
Table 5-3 Remote Station Configuration Overview
Filename
/root/cobalt/start_ms.sh
/root/cobalt/ms_config.xml
/root/cobalt/MS_snmpbuild/snmpd.conf
COM-00-21-04
Version No.: A.1
WITHIN THE ROOT DIRECTORY OF THE RS, THERE ARE
SEVERAL IMPORTANT FILES. IT IS IMPORTANT TO BE
CAREFUL WHEN MAKING CHANGES TO FILES IN THIS
DIRECTORY. CHANGES TO THESE FILES CAN CAUSE THE
RADIOS TO NOT CONNECT. PLEASE PROCEED WITH CAUTION.
CAUTION
Function
Remote Start-up Script
Application Configuration File or Link
SNMP Configuration file
5-10
OCTOBER 2021
Advertisement
Table of Contents
