Advertisement
６．Part names and functions
Matsushima Measure Tech Co., Ltd.
(1) RANGE： measure range（１、２、３、４、５、６、７、８、９）set
(2) L1 ON : setＯＮ point of limit 1 （set range：０〜１００％）
(3) L1 OFF: setＯＦＦ point of limit 1（set range：０〜１００％）
(4) L2 ON : setＯＮ point of limit 2 （set range：０〜１００％）
(5) L2 OFF: setＯＦＦ point of limit 2（set range：０〜１００％）
Minimum range of Hysteresis is still１％.
(6) INTEGRATION TIME： Integral time set（set range：０〜３０ seconds）
MADE IN JAPAN
Fig.11. Front panel of Output unit
【for indication】
POWER LED : Light on as power on
FAULT LED : CPU on when abnormal
L1 ON LED : Light on over limit１set
％
L2 ON LED : Light on over limit１set
4 beams indicate LED: detection density
will indicate per 0-100% complying with
setup.
【for button】
→
：
use when changing beam of
number/value.
↑
： use when increasing number/value.
： use when switching parameter set
ＭＯＤ
mode and measure mode.
Pushing after set change will
memorize parameter and return to measure
mode.
：
ＳＥＬＥＣＴ
Use when switching set items.
Ｆ−ＲＥＳＥＴ
U se when setting measure again.
- 8 -
：
Advertisement
