Install The Rack Latches - Lenovo ThinkSystem SR550 Maintenance Manual

If you are instructed to return the old rack latches, follow all packaging instructions and use any packaging
materials that are provided.

Install the rack latches

Use this information to install the rack latches.
"Read the
installation
Guidelines" on
page 53
Before installing the rack latches, touch the static-protective package that contains the new rack latch to any
unpainted surface on the outside of the server. Then, take the new rack latch out of the package and place it
on a static-protective surface.
To install the rack latches, complete the following steps:
Watch the procedure
A video of this procedure is available at
C9jFjZnXQ6AmTXaIdX6_HJ
Step 1. On each side of the server, align the rack latch with the pin on the chassis. Then, press the rack
latch onto the chassis and slightly slide it to the direction as shown.
Figure 43. Rack latch installation
ThinkSystem SR550 Maintenance Manual
70
"Power off
the server
for this task"
on page 13
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
.
"ATTENTION:
Static Sensitive Device
Ground package before opening"
on page 56