Server models with sixteen 2.5-inch hot-swap drives
Use this section to understand the cable routing for server models with sixteen 2.5-inch hot-swap drives.
Figure 24. Cable routing for server models with sixteen 2.5-inch hot-swap drives and two 8i adapters
Cable
SAS signal cable*
1
SAS signal cable*
2
From
SAS 0 and SAS 1 connectors on the
backplane 1
SAS 0 and SAS 1 connectors on the
backplane 2
To
HBA/RAID adapter installed in PCIe
slot 4:
• Gen 3: C0C1
• Gen 4: C0
HBA/RAID adapter installed in PCIe
slot 1:
• Gen 3: C0C1
• Gen 4: C0
.
Chapter 2
Server components
43