Troubleshooting - Husqvarna QSI7134W User Manual

Table of Contents

Advertisement

36
www.husqvarna-electrolux.se
The side lamp
Find the lamp glass cover at the left side
of the cavity.
1. Remove the left shelf support to get
access to the lamp.
2. Use a narrow, blunt object (e.g. a
teaspoon) to remove the glass cover.
3. Clean the glass cover.

13. TROUBLESHOOTING

WARNING!
Refer to Safety chapters.
13.1 What to do if...
Problem
You cannot activate the ap-
pliance.
You cannot activate the ap-
pliance.
You cannot activate or oper-
ate the hob.
You cannot activate or oper-
ate the hob.
4. Replace the lamp with a suitable
300 °C heat-resistant lamp.
5. Install the glass cover.
6. Install the left shelf support.
12.8 Removing the drawer
The drawer below the oven can be
removed for cleaning.
1. Pull the drawer out until it stops.
2. Lift the drawer slightly, so that can be
lifted upwards at an angle of the
drawer guides.
To install the drawer, follow the
procedure in reverse.
Possible cause
The appliance is not connec-
ted to an electrical supply or
it is connected incorrectly.
The fuse is blown.
You touched 2 or more sen-
sor fields at the same time.
There is water or fat stains
on the control panel.
WARNING!
Do not keep flammable
items (such as cleaning
materials, plastic bags, oven
gloves, paper or cleaning
sprays) in the drawer. When
you use the oven, the drawer
can become hot. There is a
risk of fire
Remedy
Check if the appliance is cor-
rectly connected to the elec-
trical supply.
Make sure that the fuse is
the cause of the malfunction.
If the fuse is blown again
and again, contact a quali-
fied electrician.
Touch only one sensor field.
Clean the control panel.

Advertisement

Table of Contents
loading

Table of Contents