Toro 02858 Installation Instructions Manual page 8

Figure 19
1. Reducer fitting (3/4 x 7/16
inch)
3. Assemble the quick-connect fitting
into the reducer fitting.
Figure 20
1. Reducer fitting (3/4 x 7/16
inch)
4. Torque the quick-connect fitting to 27 N∙m (20
ft-lb).
5. Assemble the test equipment onto the
quick-connect fitting
Figure 21
6. Connect the battery, install the
storage compartment, and perform the
hydraulic-pressure test; refer to
the Battery (page
2. Brake-pressure
transducer
(Figure
2. Quick-connect fitting
(Figure 21).
Connecting
9), Installing the Storage
Compartment (page
Hydraulic Pressure (page
Preparing the Traction Pump
Machines with and without the Optional
Road Light Kit—and without the Optional
Differential-Lock Kit
1. At the right side of the traction pump, assemble
the test equipment onto the quick-connect fitting
(Figure 22).
g344080
20)
g344071
2. Connect the battery, install the
storage compartment, and perform the
hydraulic-pressure test; refer to
Hydraulic Pressure (page
g344395
8
9), and Testing the
10).
Figure 22
Testing the
10).
g343559
g344077