Cleaning And Maintaining Your Single Serve Brewer - Frigidaire ECMK205 Use & Care Manual

10
• Customize Your Flavor & Brew – With the choice of over 200 variet-
ies of K-Cup® pack, your Brewer gives you endless options to
customize the flavor and strength that's perfect for you. For a strong,
intense cup, select an Extra Bold K-Cup® pack(with up to 30% more
ground coffee than regular varieties). Fill the reservoir with filtered or
bottled water up to the FILL LEVEL indicator and brew normally.
• Brewing Into a Tall Mug – To brew into a tall mug, simply remove the
Drip Tray Assembly and place the tall mug on the Drip Tray Base.
• The Drip Tray – Any liquid over flow (from your cup or the Cold
Water Reservoir) will be caught in the Drip Tray.Be sure to empty the
Drip Tray. The Drip Tray has a snug fit to ensure it stays put in transit.
• Clean Your Brewer Regularly – To keep your Brewer looking and
performing its best, be sure to clean the external and internal com-
ponents on a regular basis. See page 10 for more information.
• Descaling – Mineral content in water varies from place to place.
Depending on the mineral content of the water in your area, calcium
deposits or scale may build up in your Brewer. Scale is non-toxic, but
left unattended, it can hinder Brewer performance. Descaling your
Brewer helps maintain the heating element and other internal parts
of the Brewer that come in contact with water.
• Storing – When storing your Brewer, carefully empty the Drip tray
and water reservoir.

CLEANING AND MAINTAINING YOUR SINGLE SERVE BREWER

Cleaning External Parts
IMPORTANT: Make sure the Brewer is unplugged before cleaning
Regular cleaning of the Brewer's external components is recommended.
Allow to Cool.
1. Never immerse the Brewer in water or other liquids. The Housing and
other external components may be cleaned with a soapy, damp,
non-abrasive cloth.
2. The Drip Tray can accumulate liquids. The Drip Tray and Drip Tray
Plate should be periodically inspected and cleaned with a damp
soapy nonabrasive lint free cloth. The Drip Tray and Drip Tray Plate
should not be put into the dishwasher. To remove the Drip Tray
Assembly, simply slide it toward you, keeping it level at all times to
avoid spilling.
Cleaning the K-Cup® pack Holder Assembly
1. Cleaning the Parts – The K-Cup® pack Holder Assembly can be
placed onto the top shelf of a dishwasher. NOTE: Use low tempera-