Frigidaire ECMK205 Use & Care Manual page 8

8
8. Select Brew Size by pressing the serving size button ( * with a beep
indicating the brew is starting).
9. The brewer starts to brew while the pressed button will be flashing
during the brewing process, the brewing stops automatically when
the button stops flashing after brewing time is reached (* with 2
beeps).
The process can be stopped manually by pressing the same button (*
with 2 beeps).
Caution: Before opening the lid, leave the brewer to escape steam/re-
sidual water completely for 20 seconds.
10. Your delicious coffee is ready.
11. Prior to open the brewer head, always let residual drips/steam to
escape completely.
12. Remove the used K-cup from the brewer as per the figure, keep
your hands far from the hot water outlet.
Caution: Do not open the handle when the machine is brewing, if the
brewer is opened unintentionally the pump will stop the brewing
with all illumination lights flashing (*with beep emitting), indicating it
is danger of scalding and hot water spitting from the brewer head,
close the handle immediately to its position.
Pump always stops earlier while this does not mean the brewing
process is completely, the button continues to blink for 20 seconds to
let steam/residual water to escape, do not lift the handle during this
steam/residual water escaping stage.
Tips:
When use the machine in first time or the machine is cold, It is suggest-
ed to make a cup of water to rinse the cup and in the mean time to
help warm up the machine.
*: Optional feature.
**: Optional feature.