Post-Setup Procedures - Epson Pollution Preventer User Manual

Post-SETUP Procedures

After you run SETUP for the first time, you may need to install
the operating system if your computer is not preconfigured.
See your operating system manual for instructions.
Once you have installed your operating system, install any
software you plan to use. See your application program
manuals for instructions.
You may also want to install the optional extended video
drivers for some of your application programs. (If your
computer was configured for you, these drivers are already
installed.) The README files on Drivers Diskettes 1 and 2
provide instructions for installing and using the drivers.
To read the file on your screen, insert Drivers Diskette 1 in
drive A, type the following, and press
:\
A README
To print the file to your printer, type the following and press
Enter:
:\
A READMEP
Use the same commands to read or print the README file on
Drivers Diskette 2.
Note
If you plan to install video drivers for Microsoft® Windows
applications, you must install Windows before you install
the drivers.
1-20 Setting Up your System
Enter:
TM