LG BUEL011HBC1 Installation Manual page 32

Installation
Pass the 3 power cables (Positive, Negative and Ground) through the lower cable gland on
G
the right side of the battery unit. Rotate the cable gland to tighten the gland hole.
For connection at LG ESS PCS please refer to the PCS Manual chapter "Battery
Connection".
Strip off the 3 power cables at the battery unit as shown in the figure.
H
Red
Green
Black
Connect the 3-conductor power wires to the power terminal block as shown in the figure.
i
After completing all connections, temporarily removed connection box cover and cables
must be restored to their original state.
Red
Green
Black
32
12 mm
3. Battery wire +
2. Earth
1. Battery wire -