Table of Contents
Advertisement
n
Confirm by looking at the PDJ-A640 from the front that
the feet of the DECK are correctly fit into the bottom holes
on the corresponding rack. The height of the washer on
PDW-HD1500/F1600 is low and confirm that well. If they
are out of place (upper figure), the disc cartridges cannot
be exchanged between the DECK and the Cart machine.
Confirm that the DECK is correctly positioned with its feet
fit in the holes. (right figure).
n
The front panel of the PDW-HD1500/F1600 is a tilt-up
type.
When installing the PDW-HD1500/F1600 to the CART,
check that the front panel is closed. If it is tilted, the
elevator may hit it when you manually operate the elevator
with the door of the cart opened. Be sure to close the front
panel before use. (See the following figure.)
PDW-HD1500/F1600
Front Panel
PDJ-A640 IM
PDW-1500
PDW-HD1500/F1600
PDW-F70/F75
3-13 (E)
Advertisement
Table of Contents
