Table of Contents
Advertisement
6) Specification of national date and time.
Enter SYSTEM MENU.
Level 1: →DATE/TIME PRESET
→Set YEAR, MONTH, DAY,TIME.
Level 2:
7) Set the toggle switch on the left of the control panel to REMOTE.
8) Set Video INPUT to SDSDI or COMPOSIT by using the function key F1 on the top right corner
of the LCD when using the PDW-F75.
n
SDSDI and COMPOSIT can only be set when PDBK-104 is attached to the PDW-F75.
n
Refer to the operation manual of each model for the setting procedure of the DECK.
In addition, attach the PDBK-A640 when mounting the PDW-F70 on the cart.
Attach the PDBK-A640/PDBK-104 when mounting the PDW-F75 on the cart.
(3) Use PDJ-CS10 to check whether ftp is connected to each DECK.
Checking method
Insert a compatible recorded cartridge into the DECK.
Click the right mouse button of the PC on which the PDJ-CS10 has already been installed, and open "New terminal".
(Refer to the "PDJ-CS10 INSTALLATION MANUAL" for how to install the PDJ-CS10.)
[xdcart@XXXXXXX root] $
[xdcart@XXXXXXX root] $ ftp XX.XX.X.XXX
Connected to XX.XX.X.XXX.
220 You are user number 1 of 1 allowed.
220 Service ready for new user.
500 Syntax error, command unrecognized.
KERBEROS_V4 rejected as an authentication type
Name (XX.XX.X.XXX):
Name (XX.XX.X.XXX): YYYYYY
331 User name okay, need password.
Password:
Password: ZZZZZ
230 User logged in, proceed.
Remote system type is UNIX.
Using binary mode to transfer files.
ftp>
After checking the above
ftp>
←Enter "by". (To quit from ftp)
ftp>by
If "230 User logged in, proceed." is not displayed, check the IP Address of the DECK and turn the power switch to the
DECK on and off several times, and then try reconnecting to the ftp.
PDJ-A640 IM
←Enter the IP Address for the DECK.
←Enter the Name.
←Enter the Password.
←Confirmation.
5-9 (E)
Advertisement
Table of Contents
