Floater
•
Hold the rubber ting around the floater,
and pull outwards to remove it from
the top lid. Clean it regularly with water
and make sure there's no food residue
sticking to it, otherwise you may encounter
difficulty to open the lid.
•
To assemble the floater, put the thin end of
the floater into the hole on the lid (fig.1),
and assemble the rubber ring around the
floater (fig.2).
1
2
•
You can also add water to the pot and
start the steam function to help with the
cleaning.
Pressure regulator
•
Hold the handle of pressure regulator and
pull it out gently. Rinse it under tap water
to remove food residues inside, or use a
toothpick.
•
Hold the right handle of pressure regulator
and assemble it back to the inner lid.
Sealing ring
Note
Do not remove the sealing ring by force, it
•
will leak if not fully assembled.
•
Put the sealing ring with the groove facing
upwards in a flat surface.
EN
23