Verifying The Installation - Huawei FusionCol8000-E240 Quick Manual

Removing the Transport Fasteners and Desiccant Bags
9
from the Compressor
10

Verifying the Installation

Item Check Content
The unit installation meets the installation requirements. The foreign
matter inside the cabinet such as cable ties and stubs is cleaned up.
Unit
The desiccant bags in the compressor and electric control box have been
removed.
The fans are properly secured. There is no foreign matter inside the fans.
Fan
The fan blades rotate properly.
The water pump is secured reliably and steadily. The water strainer is
Water
system secured reliably and steadily. The floats are secured. The sheet metal
fasteners are secured reliably. The high and low liquid level detectors, and
the water overflow detector can move flexibly. The water inlet pipe and
drainpipe are securely connected without leakage.
Cables are intact and free from sharp bends. No open or short circuit, or
incorrect connection occurs in electrical loops. The power cables, signal
Electrical cables, teamwork control cables, and T/H sensor cables for the unit are
connection connected as required. The rated specifications of the upstream general
switch meet the maximum current requirement. All cables, connectors,
and screws are secured. The device is properly grounded.
The water pan is free of sundries inside, and its filter and drainage port
Water pan
are not blocked.
The sheet metal fasteners on the compressor have been removed. The
Compressor
bolts for securing the compressor have been tightened.
The air filter is correctly installed according to the airflow direction
Air filter
marked on the frame.
1. Remove the sheet metal fasteners for
securing the compressor during
transportation.
2. Find the desiccant bags in the
compressor and electric control box
and remove them.
21
Check
Result
□ Passed
□ Failed
□ Passed
□ Failed
□ Passed
□ Failed
□ Passed
□ Failed
□ Passed
□ Failed
□ Passed
□ Failed
□ Passed
□ Failed
□ Passed
□ Failed