Operation; Charging The Battery - LG VDS-ST1AU Owner's Manual

OPERATION

Charging the Battery

Before Charging the Battery
• Make sure that the adapter is connected to both
the charging station and the power outlet.
• Fully charging a single battery usually takes 4
hours. It will take twice as long to charge both
the main and spare batteries.
• The battery will not be charged if the indoor
temperature is below 5 ℃. Only charge the
battery when indoor temperatures are between
5 ℃ and 38 ℃.
• The battery will eventually need to be replaced.
Due to the battery characteristics, runtime is
shortened after using the appliance repeatedly
for an extended period.
• The last bar on the battery indicator begins to
flash when the battery needs to be recharged.
Use the appliance with a fully charged battery.
• To maintain battery life on dual-battery models,
swap the positions of the two batteries
periodically, between the main body and the
spare charging station.
Charging the Spare Battery
After the vacuum cleaner has finished charging,
the spare battery will start charging.
One or two batteries are provided. The number of
batteries varies depending on the model
purchased.
1
Lift the front of the control panel located at the
top of the charging station.
2
To insert, align the battery with the outline of
the battery charger.
3
Press the battery down into the compartment.
NOTE
• The spare battery icon (
flashes during charging and remains on when
charging is complete.
• Insert the spare battery completely. If the spare
battery is inserted correctly, the spare battery
icon ( * ) flashes.
OPERATION
19
) in the status display
*