LG VDS-ST1AU Owner's Manual page 21

Status Display
List
Dust Emptying
(Replace Bag)
Indicator
a
Spare Battery
Indicator
b
Auto Emptying
Indicator
c
NOTE
• Remove all the protective plastic from the vacuum cleaner before use. Otherwise, it may cause abnormal
noise during the dust emptying operation.
• Indicates the dust emptying operation status or when to replace the
dust bag.
- White: Product is emptying dust.
- Flashing red: If the indicator flashes red while emptying dust, this
indicates dust bag requires replacement. At the end of dust
emptying operation, replace dust bag.
- Flashing red, beeping: If the dusty emptying operation is complete
and the dust bag is full, the indicator will flash red, beep 10 times
and then turn off.
- If the indicator flashes red, replace the dust bag to maintain product
performance.
• Indicates the charging status of the spare battery.
- Flashes: When the spare battery is mounted in the charger.
- On (steady): Spare battery charging is complete.
- The spare battery will not charge until the battery mounted in the
vacuum cleaner is fully charged. Check the battery level on the
handle of the vacuum cleaner to check whether charging is
complete.
• Lights to indicate that the automatic dust emptying mode is on.
- Automatic dust emptying mode automatically starts the operation
every time the vacuum cleaner is mounted correctly onto the
product.
- If you remove the vacuum cleaner and mount it immediately, dust
emptying operation may not start automatically, depending on the
circumstance. If it doesn't start automatically, select the Start/Stop
button to start.
OPERATION
AUTO
Descriptions
21