Basic Setup - D-Link DPH-130S User Manual

1-5 Basic Setup

Please use the following instructions to setup your new DPH-130S IP
Phone:
1. Unpack the box and determine whether anything is missing.
2. Insert the Ethernet cable into the network port labeled "LAN" on the phone, as shown
below.
3. Connect the other end of the Ethernet cable used in step 2 to your local area network
(LAN). Please make sure you can access the Internet from your LAN. If you are
using this phone in a company, please ask the network administrator for detailed
information; If you are using this phone in your home, you should connect the
Ethernet cable to your ADSL or Cable modem directly or to a router connected to an
ADSL or Cable modem.
9
Here