Table 7 Nic Pci Frequency - Nokia IP1200 Series Installation Manual

Security platform
Table of Contents

Advertisement

5
Connecting PMC Network Interface Cards

Table 7 NIC PCI Frequency

NIC or interface port
Four-port 10/100 Ethernet
Dual-port 10/100 Ethernet
Dual-port fiber-optic Gigabit Ethernet
Dual-Port copper gigabit Ethernet
(10/100/1000)
Single-port ISDN S/T
Single-port V.35 or X.21
Single-port T1 NIC
Single-port E1 NIC
Note
Any two NICs installed on a single PMC carrier will both operate at the
PCI frequency of the least-capable NIC installed. For example, if a dual-
port Ethernet NIC and a dual-port fiber-optic Gigabit Ethernet NIC are
installed on the same PMC card carrier, they both operate at 66 Mhz. Use
this information to plan your NIC installation to maximize data throughput
on your appliance.
Caution
To protect the IP1200 Series and the memory modules from
electrostatic discharge damage, make sure you are properly
grounded before you touch these components. Use a grounding
wrist strap and follow the instructions provided with the wrist strap
before you handle the components or open the appliance. If you do
74
Maximum PCI operation
supported
100 MHz
66 MHz
100 MHz
100 MHz
66 MHz
33 MHz
66 MHz
66 MHz
Nokia IP1200 Series Security Platform Installation Guide

Advertisement

Table of Contents
loading

Table of Contents