Epson TM-P20 Software User Manual page 17

Hide thumbs Also See for TM-P20:

Table of Contents

TM-P20 Software Installer

Note:

The followings are the default settings. Change the settings for your environment if required.

Wireless setting

❏ SSID: EPSON_Printer

❏ Network mode: Infrastructure

❏ Security level: WPA2 personal

❏ Security key: EpsonNet

TCP/IP setting

❏ IP address: Automatic DHCP

Select the printer you want to configure, then click the Configuration button.

The Device Properties screen appears. Select the Network Interface - Network - Basic (Wireless).

Set the Wi-Fi network connection.

If the communication mode is Ad Hoc.

If the communication mode is Infrastructure.

When the communication mode is Ad Hoc, the Wi-Fi network settings are as follows. When finished

configuring the settings, go to step 9.

Setting

Communication Mode:

SSID:

Channel:

Transmission Rate:

Software User's Manual

Installation

Description

Select Ad Hoc.

Set the SSID.

The maximum is 32 alphanumeric characters.

Select the channel.

Select the transmission rate.

Proceed to Step 7.

Proceed to Step 8.

Table of Contents