TM-P20 Software Installer
Setting
Transmission Rate:
Security Level:
If the Security Level is WEP-64bit(40bit) or WEP-128bit(104bit):
Setting
Input using hex
WEP Key:
Key Index:
Detailed
If the Security Level is WPA-PSK(TKIP) or WPA-PSK(AES):
Setting
PSK (Pre-shared Key):
Software User's Manual
Installation
Description
Select the transmission rate.
Select the security level.
Description
Check the checkbox choosing the WEP Key to be input as a hexadecimal
number.
The WEP Key length varies depending on the Security Level.
For WEP-64bit(40bit), ASCII 5 characters
For Hex WEP-64bit(40bit), 10 places
For WEP-128bit(104bit), ASCII 13 characters
For Hex WEP-128bit(104bit), 26 places
Select the key index.
Display the Detailed Security Settings screen.
Select the AP Authentication Method from Open System or Shared Key in
the Detailed Security Settings screen.
Description
Input the Pre-shared Key. ASCII 8 to 63 characters
19