Epson TM-P20 Software User Manual page 26

TM-P20 Software Installer
E
Select the printer to be paired (Not been paired yet) and click Connect.
F
If the window to enter a passkey appears, enter a passkey and click OK.
Initial passkey: 0000
G
The "Assign port" window appears. Select the port to be used from the pull-down list and click OK.
H
The "Connection complete" window appears. Click Test Buzzer or Test Printing to check operation.
The printer buzzer sounds or printing starts.
!
Caution:
If TM Bluetooth Connector Status is " x" after pairing, check the followings.
❏ The printer power source is 10 m or less away from the computer power source.
❏ There is no other wireless device, such as a microwave oven and cordless telephone, that can interfere
with the Bluetooth printer.
❏ The printer and the computer are in the same room.
❏ The TM Bluetooth Connector search time is not set short.
❏ The printer to be detected is not communicating with any computer.
If TM Bluetooth Connector Status is " Not been paired yet", check the following.
❏ The printer is not paired. Perform pairing again.
I
Click the "x" button of TM Bluetooth Connector to exit.
Software User's Manual
Installation
26