Table of Contents
Advertisement
•
Narrow tilling—41 cm (16 inch) width
Figure 20
•
Narrow cultivating—28 cm (11 inch) width
Note:
The side shields may be removed for
this configuration. Remove the hand knobs
and rotate the handlebars back to remove
the side shields.
Figure 21
4.
For narrow and wide tilling configurations,
continue as follows:
A.
Install the lock pins.
Important:
the front of the tiller so that the wire
hinges over the top of the tine pipe and
latches to the pin on the rear of the tine.
The tines could inadvertently detach
during tilling if the lock pins are installed
incorrectly.
g358251
1. Wire hinge point
B.
Ensure that the side shields are securely
installed.
Note:
into place when you install it.
g358250
14
Install the lock pin from
Figure 22
You will hear or feel the shield click
Figure 23
g358135
g358168
Advertisement
Table of Contents
