Table of Contents
Advertisement
D.
Start the engine and run it until it shuts off.
E.
Dispose of fuel properly. Recycle the fuel
according to local codes.
Important:
stabilizer/conditioner longer than
the duration recommended by the
fuel-stabilizer manufacturer.
7.
Remove and check the condition of the spark
plug; refer to
Servicing the Spark Plug (page
With the spark plug removed from the engine,
pour 15 ml (1 tablespoon) of engine oil into the
spark plug hole. Install the spark plug and pull
the recoil rope 3 times to coat the cylinder with
oil. Do not install the wire on the spark plug.
8.
Check and tighten all fasteners. Repair or
replace any part that is damaged.
9.
Paint all scratched or bare metal surfaces. Paint
is available from your Authorized Service Dealer.
10.
Store the machine in an upright position in a
clean, dry garage or storage area. Keep it out
of reach of children or other unauthorized users.
Cover the machine to protect it and keep it clean.
Do not store fuel containing
21).
26
Advertisement
Table of Contents
