Technical Data - Bosch GBH 36 V-LI Plus Manual

OBJ_BUCH-283-014.book Page 17 Thursday, August 17, 2017 3:16 PM
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.

Technical Data

Rotary Hammer
Article number
Speed control
Stop rotation
Right/left rotation
Quick change chuck
Rated voltage
Rated power input
Impact rate
Impact energy per stroke according to EPTA-Procedure
05/2009
Rated speed
– Right rotation
– Left rotation
Tool holder
Spindle collar diameter
Drilling diameter, max.:
– Concrete
– Brickwork (with core bit)
– Steel
– Wood
Weight according to EPTA-Procedure 01:2014
Permitted ambient temperature
– during charging
2)
– during operation and during storage
Recommended batteries
Recommended chargers
1) depending on the battery pack being used
2) limited performance at temperatures <0 °C
Technical data determined with battery from delivery scope.
Assembly
Battery Charging (see figure A)
 Use only the battery chargers listed on the accessories
page. Only these battery chargers are matched to the lith-
ium-ion battery of your power tool.
Note: The battery supplied is partially charged. To ensure full
capacity of the battery, completely charge the battery in the
battery charger before using your power tool for the first time.
The lithium-ion battery can be charged at any time without re-
ducing its service life. Interrupting the charging procedure
does not damage the battery.
Bosch Power Tools
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
GBH 36 V-LI Plus
3 611 J06 0..



–
V= 36
W 600
-1
min 0–4200
J 3.2
-1
min 0–940
-1
min 0–930
SDS-plus
mm 50
mm 28
mm 82
mm 13
mm 30
1)
kg 4.0/4.5
°C 0...+45
°C –20...+50
GBA 36V ...
AL36..
GAL 36..
The lithium-ion battery is protected against deep discharging
by the "Electronic Cell Protection (ECP)". When the battery is
empty, the machine is switched off by means of a protective
circuit: The inserted tool no longer rotates.
 Do not continue to press the On/Off switch after the
machine has been automatically switched off. The bat-
tery can be damaged.
Removing the battery
The battery 11 is equipped with two locking levels that should
prevent the battery from falling out when pushing the battery
unlocking button 18 unintentionally. As long as the battery is
inserted in the power tool, it is held in position by means of a
spring.
English | 17
GBH 36 VF-LI Plus
3 611 J07 0..




36
600
0–4200
3.2
0–940
0–930
SDS-plus
50
28
82
13
30
1)
4.1/4.6
0...+45
–20...+50
GBA 36V ...
AL36..
GAL 36..
1 609 92A 3XU | (17.8.17)