Siemens SIMATIC NET SCALANCE W1788 Series Operating Instructions Manual page 50

Installation and removal
5.4 Installing on a DIN rail
Installation
1. Place the device on the upper edge of the DIN rail
2. Press the device against the DIN rail until the DIN rail slider catch locks in place
3. Connect the power supply, refer to the section "Power supply (Page 63)".
4. Fit the antennas, refer to the section "Antennas (Page 67)".
50
.
SCALANCE W1788-x / W1748-1
Operating Instructions, 03/2022, C79000-G8976-C484-05
.