Installing On A Standard Rail - Siemens SIMATIC NET SCALANCE W1788 Series Operating Instructions Manual

Installation and removal

5.5 Installing on a standard rail

5.5 Installing on a standard rail
The mounting adapters and the corresponding screws are not supplied with the product;
see "Accessories" (Page 24).
Installation
1. Unscrew the bracket pre-installed at the factory for securing to a DIN rail from the
device and remove it
52
.
Operating Instructions, 03/2022, C79000-G8976-C484-05
SCALANCE W1788-x / W1748-1