Sharp FO-3150 Operation Manual page 77

4
Press a number from 1 to 3 to select the ring pattern below that matches
your second number's ring pattern. Press 4 to have your fax
automatically answer your normal telephone number. Press 5 to turn off
the distinctive ring function.
1 : RING PATTERN 1
: RING PATTERN 2
2
: RING PATTERN 3
3
: STANDARD RING
4
: OFF SETTING
5
STOP
5
Press to return to the date and time display.
6
Set the reception mode to FAX.
♦
When using distinctive ring, you must set the reception mode of your fax
machine to FAX. When your designated fax number is dialed, your fax will
automatically answer and begin reception after two rings. Note that other
devices on the same line will also ring until your fax answers. If one of your
other numbers is dialed, the fax will ring; however, it will not answer.
Distinctive Ring (Requires Subscription to Service)
Two short rings
One short, one long, and one short ring
Two short rings and one long ring
Your standard (normal) ring pattern
Turn distinctive ring off
The display briefly shows
your selection, then:
RESOLUTION/
RECEPTION MODE
FAX SIGNAL RX
TEL FAX
A.M.
75