Sharp FO-3150 Operation Manual page 81

Requesting transmission
1
Dial the fax machine you want to poll using one of the following
methods:
•
Pick up the handset (or press
fax answerback tone.
•
Pick up the handset (or press
answerback tone.
SPEED
DIAL
•
Press
•
Enter the full number using the numeric keys.
2
08/POLL
Press
•
If you used the handset, replace it when POLLING appears in the display.
Reception will begin.
Being polled (Memory polling)
To let another fax machine poll your fax machine, you must first store the
document(s) in memory using the following procedure. Transmission will take
place when the other fax machine calls your fax machine and activates
polling. You can choose whether to allow polling only once, or an unlimited
number of times. In the latter case, your fax machine can be used as an
electronic "bulletin board".
♦
If you allow polling only once, the document(s) will be automatically cleared
from memory after polling. If you allow polling an unlimited number of times,
the document will remain in memory until you clear it as explained in the
following section, Clearing a memory polling document .
Polling (Requesting a Fax Transmission)
SPEAKER
SPEAKER
and enter a 2-digit Speed Dial number.
.
) and dial the full number. Wait for the
) and press a Rapid Key. Wait for the fax
79