Siemens FDA241 Mounting & Installation page 32

Installation
4
Connection to input/output module
32
Building Technologies
Fire Safety
Interface Function
'GPI' Possible to reset an alarm or the status of the aspirating
smoke detector using the fire control panel
'Fault' A general fault is indicated on the fire control panel
'Inspect 1' An early warning is indicated on the fire control panel
'Prealarm' A pre-alarm is indicated on the fire control panel
'Fire 1' An alarm is indicated on the fire control panel
No external extinguishing equipment can be controlled with this connection
variant.
firealarmresources.com
A6V10345654_h_en_--
2015-05-29