Getting Started; Switching The Speaker On And Off - Silvercrest SBL 3 D2 Operating And Safety Instructions Manual

• During the charging process, the battery indicator (11) flashes.
After the charging process is completed, the battery indicator
(11) lights up.
• After charging, disconnect the charging cable (B) and close the
cover of the USB charging port (6).

9. Getting started

9.1 Switching the speaker on and off

Press and hold the
speaker. A tone sequence is output. The speaker starts in the last
used mode.
A low battery level is indicated by the flashing battery
indicator
button (1) for 2 seconds to switch on the
(11). In addition, you can hear a beep.
SilverCrest SBL 3 D2
US-EN - 29