Checking The Alarm Status - Silvercrest SBL 3 D2 Operating And Safety Instructions Manual

• The volume indicator (10) flashes. Now you can use the I◂◂ (8)
and ▸▸I (4) buttons to set the alarm volume. During the setting,
the alarm sound is played at the set volume. You can keep the
buttons pressed to accelerate the digits count. To accept the
setting, briefly press the ▸II button (5).

9.8 Checking the alarm status

You can check the alarm status in alarm mode. Proceed as follows:
• Power on the speaker by pressing and holding the
for approx. 2 seconds.
• Press the M button (9) repeatedly until "AL" (14) flashes on the
display (2) and
• Briefly press the ▸II (5) button. The display (2) now shows "A
ON" (when the alarm is activated) followed by the set alarm time
or "A OFF" (when the alarm is deactivated).
(12) or "FM" (13) goes out.
SilverCrest SBL 3 D2
button (1)
US-EN - 37