Checking The Charge Level; Operation And Use; Switching The Speaker On/Off - Silvercrest SLB 20 A1 Operating Instructions Manual

Checking the charge level

You can also check the speaker's charge
level when it is not charged or while it is
being used for charging.
♦ While the device is switched on, briefly
press any button . The four LEDs of the
battery charge level display
the current charge level of the speaker
for about 10 seconds.
NOTE
► For information about checking the
speaker's approximate charge level
using the battery charge level
display
section Charging the internal battery.

Operation and use

Switching the speaker on/off
♦ Press and hold the
about 3 seconds to switch the speaker
on and activate the Bluetooth
tion. The
twice and you will hear a beep.
│
■ 70
1
, refer to the table in the
button
GB │ MT
1
2
button
2
flashes orange
SLB 20 A1
show
for
func-
®