Husqvarna BMC 335 Operator's Manual page 23

To change the product into a scarifier,
50 Hz
To change BMC 335, 50 Hz, into a scarifier, an HTD
drive belt and an HTD pulley are necessary.
1. Remove the support plate.
2. Remove the screws and washers from the side
cover.
3. Install the screws with washers in the adjacent holes.
1816 - 001 - 05.04.2022
4. Turn the screws to push the side cover off.
5. Remove the cover and the drive belt cover and
loosen the screw (A) in the center of the top pulley.
A
23