Husqvarna BMC 335 Operator's Manual page 28

8. Loosen the nuts (A) and (B).
A
B
9. Remove the screw (C), the bushing (D), the pulley
(E) and the drive belt(F).
F
28
E
D
C
10. Remove the shaft nut (G) with the hook wrench (H).
H
11. Remove the pulley (J).
12. Install the pulley (K) from the kit.
H
13. Install a new shaft nut (L) from the kit. Tighten it with
the hook wrench (H).
J
G
K
L
1816 - 001 - 05.04.2022