Husqvarna BMC 335 Operator's Manual page 26

19. Install the drive belt cover (E) and the cover (D).
20. Set the switch for direction of rotation of the control
panel to clockwise (CW).
WARNING:
counterclockwise direction of rotation when
you use the product as a scarifier.
To change the product into a scarifier,
60 Hz
To change BMC 335, 60 Hz, into a scarifier, a kit with
special parts is necessary.
26
E
D
Do not use
1. Remove the support plate.
2. Remove the screws and washers from the side
cover.
3. Install the screws with washers in the adjacent holes.
1816 - 001 - 05.04.2022