Front Bezel; Removing The Front Bezel - Dell OptiPlex 7000 Micro Service Manual

Steps
1. Align the side cover with the grooves on the chassis.
2. Slide the side cover towards the back of the system to install it.
3. Tighten the thumbscrew (6x32) to secure the side cover to the system.
Next steps
1. Follow the procedure in

Front bezel

Removing the front bezel

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
About this task
The following images indicate the location of the front bezel and provide a visual representation of the removal procedure.
Steps
1. Pry the retention tabs to release the front bezel from the system.
14 Removing and installing components
after working inside your
before working inside your
computer.
computer.