3. Press the release tab on the fan assembly and place it on the system until it clicks into place.
Next steps
1. Install the speaker.
2. Install the
side
cover.
3. Follow the procedure in
Heat sink
NOTE:
This section applies to 35 W and 65 W configuration systems.
Removing the heat sink
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
3. Remove the
speaker
.
4. Remove the
fan
assembly.
About this task
The following images indicate the location of the heat sink and provide a visual representation of the removal procedure.
Steps
1. Loosen the three captive screws that secure the heat sink to the system.
after working inside your
before working inside your
computer.
computer.
Removing and installing components
27