Dell OptiPlex 7000 Micro Service Manual page 34

NOTE: Check if there is any SODIMM pad residual on the thermal pad and clean the residual up.
5. Align the notch on the memory module with the tab on the memory-module slot.
6. Insert the memory module into the memory-module slot.
7. Press down on the memory module until the memory module snaps into position and the securing clip locks in place.
CAUTION: To prevent damage to the memory module, hold the memory module by the edges. Do not touch
the components on the memory module.
NOTE: The securing clips return to the locked position. If you do not hear the click, remove the memory module and
reinstall it.
NOTE: If the memory module is difficult to remove, gently ease the memory module back and forth to remove it from
the slot.
NOTE: Repeat step 5 to 7 when installing more than one memory module in your computer.
34 Removing and installing components