Location And Function Of Parts And Controls; Front Panel - Sony LPM-770BP Operating Instructions Manual

Location and Function of Parts and Controls

Front Panel

a LCD protection plate
You can detach the LCD protection plate by removing
the four screws.
b i (headphones) jack
The sound of the audio signal selected by the input select
button is output.
c Speaker
The audio signal which is selected by the input select
button is output in monaural sound (L + R).
Audio signals will not be output when headphones are
connected to the i jack.
d Input select buttons
Press to monitor the signal input to each connector.
e Function buttons
You can turn the assigned function on or off.
The factory setting is as follows;
F1 button: BRIGHTNESS
F2 button: CONTRAST
F3 button: CHROMA
F4 button: SCAN
F5 button: VOLUME
You can assign various functions in FUNCTION
BUTTON SETTING of the USER CONFIG menu.
2 3 4 5
1
6
Press the button BRIGHTNESS, CONTRAST,
CHROMA, SCAN, or VOLUME etc. function assigned
to display the adjustment screen. Press the same button
again, and the adjustment screen disappears, but you can
adjust the value without the setting value display.
For details of the function assigned to the function
button, see page 19.
f Menu operation buttons
Displays or sets the on-screen menu.
Menu selection control
When the menu is displayed, turn the control to select
a menu item or setting value, and then press the
control to confirm the setting.
ENTER button
Press to confirm a selected item on the menu.
When the menu is not displayed, press the button to
display the distinguished signal format.
RETURN button
When the menu is displayed, press the button to reset
the value of an item to the previous value (except
some items).
When the menu is not displayed, press the button to
display the names of the functions selected in
FUNCTION BUTTON SETTING of the USER
CONFIG menu in the lower left of the screen.
Location and Function of Parts and Controls
7
7-GB