Attaching The Hood - Sony LPM-770BP Operating Instructions Manual

MENU button
Press to display the on-screen menu.
Press again to clear the menu.
g POWER switch and indicator
Press to turn on the power when this unit is OFF. The
indicator lights in green. Press the switch again to set the
monitor OFF. The indicator goes out. In power saving
mode, it lights in amber.
Battery level indicator
These lamps display the remaining battery level.
When the battery level is low, the bottom lamp flashes
slowly. Replace the battery soon. If the battery runs
out, the power of this unit turns off and the bottom
lamp flashes quickly for ten seconds.
8-GB
Location and Function of Parts and Controls

Attaching the Hood

Attaching the supplied hood makes it easier to view the
image even in bright light.
1
Attach the hook and loop fastener to assemble the
hood.
2
Rotate the dial to attach the hood to the tripod
socket hole, and pull the belt to the right and left.
3
Fix the hood to this unit with the belt for the rear
side.