32PF1700T_96_Tuner-RC-EN.book Page 22 Thursday, April 26, 2007 5:35 PM
TV SETTING menu
The available menu items are
dependent on the input source
being selected.
The illustration is for reference only.
Item
Selects aerial or cable system mode.
TV/CATV
Add weak or additional channels or delete unwanted channels
Channel +/-
from display memory.
Searches through all available channels and add them to memory.
Start
See
Searching and storing channels
1. Make sure that the antenna cable has been connected to the tuner box.
2. Press 目錄 (Menu) on the remote control to display the OSD menu on-
screen.
3. Press
or
Start.
4. Press OK. The display will start searching for available channels and store
them in the memory. This may take several minutes, depending on the
available channels in your area. To stop the process, press OK.
5. When the process is complete, the scanning will stop and display the
image.
Setting up favorite channels
1. Press 喜愛頻道 (Favorite) on the remote control to display the Favorite
Channels list on-screen.
2. Press
or
Channel selection buttons on the remote control to enter the channel
number that you desire.
3. Repeat step 2 above if you want to set up more favorite channels.
4. Press 喜愛頻道 (Favorite) to close the menu and save your setting.
On-Screen Display (OSD) menu
22
PICTURE
TV/CATV
Channel +/-
Start
Left/Right: Select main page.
OK/Down: Enter sub menu.
"Searching and storing channels"
to select TV SETTING and then press
to select an item (CH 1, CH 2... CH 5), then press the
PREFERENCE TV SETTING
PICTURE AD.
AUDIO
CATV
Added
OK: Start auto installation
Function
below.
or
to select